Ad3 Check The PWRGND Circuits For An Open

Measure the resistance between:

RESISTANCE REFERENCE CHART

(+) PCM Connector, Harness Side	(-)
PWRGND - Pin B10, B11, B23	Ground

Are the resistances less than 5 ohms?

Yes	No
Unable to duplicate the condition. CHECK for a loose connection, and damaged or corroded terminals. WIGGLE the harness attempting to recreate the concern. REPAIR as necessary. REFER to NO DTCS PRESENT SYMPTOM CHART INDEX , if a driveability concern exists.	REPAIR the open circuit. CLEAR the DTCs. REPEAT the self-test.