Inspection and Verification
This article provides step-by-step module configuration procedures. Carry out Programmable Module Installation (PMI) when another workshop information article directs to carry out configuration or when DTCs from the chart are present.
DTC Chart
DTC CHART
| DTC | Description | Source | Action |
|---|---|---|---|
| B2477 | Module Configuration Failure |
|
CARRY OUT PMI . REFER to Programmable Module Installation (PMI) . |
| B2477 | Module Configuration Failure |
|
INSTALL a new RCM . REFER to REMOVAL AND INSTALLATION . |
| P0602 | Powertrain Control Module Programming Error |
|
CARRY OUT PMI . REFER to Programmable Module Installation (PMI) . |
| P0605 | Internal Control Module Read Only Memory (ROM ) Error |
|
CARRY OUT PMI . REFER to Programmable Module Installation (PMI) . |
| P1639 | Vehicle ID Block Corrupted, Not Programmed |
|
CARRY OUT PMI . REFER to Programmable Module Installation (PMI) . |
| U0300 | Internal Control Module Software Incompatibility |
|
CARRY OUT PMI . REFER to Programmable Module Installation (PMI) . |
| U0301 | Software Incompatibility with Engine/Powertrain Control Module |
|
CARRY OUT PMI . REFER toProgrammable Module Installation (PMI) . |
| U2050 | No Application Present |
|
CARRY OUT PMI . REFER to Programmable Module Installation (PMI) . |
| U2050 | No Application Present |
|
INSTALL a new RCM . REFER to REMOVAL AND INSTALLATION . |
| U2051 | One or More Calibration Files Missing/Corrupt |
|
INSTALL a new RCM . REFER to REMOVAL AND INSTALLATION . |