Satellite Audio Bezel Diagnostic Test - Vehicles Without Navigation
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ACM on.
- Operate the audio system in satellite radio mode.
- Press and hold preset buttons SIRIUS and 2 for 3 seconds.
- Upon entering the self-test, the audio system produces 2 continuously alternating tones of different pitch, one for the right channel, then one for the left.
- The test continues by displaying any DTCs currently present. If no DTCs are present, NO DTCS is displayed. If there are DTCs present, the ACM auto-scrolls through the list of active DTCs.
- Historical DTCs can be viewed by pressing the SIRIUS button and preset button 2 (except navigation) or the SOUND button and preset button 1 (navigation) simultaneously while in the active DTC mode.
- If any DTCs are present, pressing the SIRIUS button and preset button 2 (except navigation) or the SOUND button and preset button 1 (navigation) prompts CLEAR DTCS? on the ACM .
- To clear historical DTCs, press preset buttons 1, 2, and 3 consecutively within 4 seconds.
- To exit historical DTCs (with or without clearing DTCs), press the SIRIUS button and preset button 2 (except navigation) or the SOUND button and preset button 1 (navigation) simultaneously.
- If no historical DTCs are present, pressing the SIRIUS button and preset button 2 (except navigation) or the SOUND button and preset button 1 (navigation) simultaneously while in active DTC mode displays the DLP software version.
- To exit the satellite audio bezel diagnostic test, press the SIRIUS button and preset button 2 (except navigation) or the SOUND button and preset button 1 (navigation) simultaneously while the DLP software version is displayed, or turn the ACM off.