Planetary Assembly: Assembly

Install the lower one-way ring.

Fig 1: Locating Lower One-Way Ring
Courtesy of FORD MOTOR CO.
Inspect the rollers and the springs of the OWC .

Fig 2: Checking Rollers And Springs Of OWC
Courtesy of FORD MOTOR CO.
Make sure the low OWC is installed with the tab pointing in the direction as shown in illustration.

Fig 3: Locating OWC Tab Position
Courtesy of FORD MOTOR CO.
Install the low OWC .

Fig 4: Locating Low OWC Assembly
Courtesy of FORD MOTOR CO.
Install the top OWC ring.

Fig 5: Locating Top OWC Ring
Courtesy of FORD MOTOR CO.
Install the top retainer of the OWC .

Fig 6: Locating Top Retainer Of One-Way Clutch
Courtesy of FORD MOTOR CO.
Install the forward planet assembly.

Fig 7: Locating Forward Planet Assembly
Courtesy of FORD MOTOR CO.
Install the thrust bearing.

Fig 8: Locating Thrust Bearing
Courtesy of FORD MOTOR CO.
Inspect the front sun gear retaining ring.

Fig 9: Locating Front Sun Gear Retaining Ring
Courtesy of FORD MOTOR CO.
Install the forward planet sun gear.

Fig 10: Locating Forward Planet Sun Gear
Courtesy of FORD MOTOR CO.
Install the thrust bearing.

Fig 11: Locating Thrust Bearing
Courtesy of FORD MOTOR CO.
Install the rear planet assembly.

Fig 12: Locating Rear Planet Assembly
Courtesy of FORD MOTOR CO.
Install the snap ring.

Fig 13: Locating Snap Ring
Courtesy of FORD MOTOR CO.