Pump Assembly: Assembly

NOTE: The smaller gear has a recess on both sides.

NOTE: The smaller recess must face away from the torque converter seal.

NOTE: The larger recess, with the beveled edge, must face toward the torque converter.

Fig 1: Locating Gears And Thrust Washers

Courtesy of FORD MOTOR CO.

Lubricate the gears and thrust washers with clean transmission fluid.
Using the Drive Pinion Oil Seal Installer, install the pump seal.
- Lubricate the gears and thrust washers with transmission fluid.
Fig 2: Installing Pump Seal
Courtesy of FORD MOTOR CO.
Install the top portion of the pump and install the pump bolts.
- Tighten to 10 N.m (89 lb-in).
Fig 3: Locating Pump Bolts
Courtesy of FORD MOTOR CO.