LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Crown Victoria Base, 4.6 W >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches And Entry Systems >> General Procedures >> Keyless Entry Keypad Code Programming >> Programming A Personal Keyless Entry Keypad Code
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming A Personal Keyless Entry Keypad Code

NOTE: Up to 3 personal keyless entry keypad codes can be programmed.
  1. Enter the factory set keyless entry keypad code.
  2. Within 5 seconds, press the 1/2 button on the keypad.
  3. Enter the personal 5-digit keyless entry keypad code. Each number must be pressed within 5 seconds of each other.
  4. To store each new personal code, press the 1/2 button within 5 seconds of entering the fifth digit of the new code to store the first code, for the second code press the 3/4 button, or for the third code press the 5/6, 7/8, or 9/0. The doors lock then unlock, confirming the new code is programmed.
  5. The door locks lock and unlock, confirming the new code is programmed.
scientia non olet · About LEMON Manuals