LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Edge Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2029 (Climate Control System) >> Removal And Installation >> Ambient Air Temperature Sensor >> Removal and Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: 3.7L shown in illustration, 5.0L (4V) and 5.8L (4V) similar.

3.7L vehicles 

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the lower radiator splash shield.

    All vehicles 

  3. NOTE: For 5.0L (4V) and 5.8L (4V) vehicles, the ambient temperature sensor can be accessed through the airflow opening in the front bumper cover.

    Detach the ambient temperature sensor electrical connector pin-type retainer.

  4. Disconnect the ambient temperature sensor electrical connector and remove the ambient temperature sensor.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals