October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the Mass Air Flow (MAF) sensor electrical connector.
Remove the 2 screws and the MAF sensor.
- To install, tighten to 2 Nm (18 lb-in).
To install, reverse the removal procedure.