Section 1968 (Brake System - General Information): Specifications
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) |
WSS-M6C62-A or WSS-M6C65-A1 | - - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Front Brakes - 2 Piston Calipers | |
| Front brake disc minimum thickness | 28.4 mm (1.118 in) |
| Brake pad minimum thickness | 3.0 mm (0.118 in) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 in) |
| Front Brakes- 4 Piston calipers | |
| Front brake disc minimum thickness | 30.0 mm (1.181 in) |
| Front brake pad minimum thickness | 1.8 mm (0.071 in) |
| Front Brakes- 6 Piston calipers | |
| Front brake disc minimum thickness | 29.0 mm (1.141 in) |
| Front brake pad minimum thickness | 7.65 mm (0.301 in) |
| Rear Brakes - All vehicles | |
| Rear brake disc minimum thickness | 17.4 mm (0.685 in) |
| Rear brake pad minimum thickness | 3.0 mm (0.118 in) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Front brake caliper bleeder screw (2 piston caliper) | 10 | - | 89 |
| Front brake caliper bleeder screw (4 and 6 piston calipers) | 18 | - | 159 |
| Master cylinder brake tube fittings | 25 | 18 | - |
| Rear brake caliper bleeder screw (all vehicles) | 10 | - | 89 |