LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Edge SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2089 (Cruise Control System) >> General Procedures >> Cruise Control Module (C-CM) (with Sensor) Adjustment >> Horizontal Alignment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Horizontal Alignment

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The horizontal alignment for the cruise control sensor is a software calibration. No manual adjustment is needed for this procedure. The scan tool calibrates the C-CM  radar sensor unit through the C-CM  calibration procedure.
  1. NOTE: The engine must be running during the horizontal alignment procedure. Failure to leave the engine running throughout the entire procedure results in the cancellation of the alignment procedure and the system remains non-functional.

    Start the engine.

  2. Follow the scan tool on-screen instructions to carry-out the C-CM  calibration procedure.
    • Follow the operating instructions shown on the Integrated Diagnostic System (IDS).
    • After completion of the test, verify that the test completed successfully.
    • Follow the prompts to drive the vehicle after successful completion of the test. This may take several minutes.
scientia non olet · About LEMON Manuals