LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Edge SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2111 (Information System And Entertainment System) >> Removal And Installation >> Front Display Interface Module (FDIM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Front Controls Interface Module (FCIM) refer to FRONT CONTROLS INTERFACE MODULE (FCIM) .
  2. Remove the 4 screws and remove the Front Display Interface Module (FDIM).
    • Disconnect the two electrical connectors.
  3. To install, reverse the removal procedure.
  4. Calibrate the FDIM  touchscreen. Refer to TOUCHSCREEN CALIBRATION .
scientia non olet · About LEMON Manuals