LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Edge SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2131 (HVAC - Climate Control System) >> Removal And Installation >> In-Vehicle Temperature Sensor >> Removal and Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal and Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column opening trim panel. For additional information, refer to the instrument panel exploded view in INSTRUMENT PANEL AND CONSOLE .
  2. Disconnect the in-vehicle temperature sensor electrical connector.
  3. Disconnect the in-vehicle temperature sensor aspirator hose from the in-vehicle temperature sensor.
  4. Remove the in-vehicle temperature sensor.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals