Touchscreen Calibration
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Recalibrate the touchscreen by following the scan tool prompts or the steps below.
- To avoid an inoperative touchscreen, make sure the vehicle battery is fully charged.
- Turn on the ACM .
- While in AM/FM mode, press and hold the EJECT button, and within 1 second, press the SEEK UP button.
- Press and hold the SEEK DOWN button to enter the touchscreen calibration.
- Touch and hold the touch points as they appear on the touchscreen (a stylus is not required).
- To accept the new settings, touch anywhere on the screen when the screen displays "New calibration settings have been measured. Press the Enter key to accept the new settings."
- Clear all CMDTCs .