Electronic Manual Temperature Control (EMTC): Notes
NOTE:
EMTC
is not available on hybrid vehicles.
NOTE:
When installing a new HVAC module on vehicles equipped with EMTC
, the Programmable Module Installation (PMI) procedure must be carried out to configure the new module to the vehicle. Refer to
MODULE CONFIGURATION
article.
The HVAC module selections include the following:
- Air inlet source (outside or recirculated)
- Blower motor speed
- Discharge air temperature (temperature blend)
- Discharge air location (defrost, panel, floor, panel/floor, defrost/floor)
- A/C compressor operation
- Rear window defroster operation
- Heated seat operation (if equipped)