DTC Tables
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
DRIVER DOOR MODULE (DDM) DTC TABLE
| DTC | Description | Action |
|---|---|---|
| B106E | Solid State Driver Disabled Due to Short Circuit | Go To PINPOINT TEST A . |
| B106F | Module Disabled Due to External Fault | Go To PINPOINT TEST A . |
| B1317 | Battery Voltage High | Go To PINPOINT TEST B . |
| B1318 | Battery Voltage Low | Go To PINPOINT TEST C . |
| B1342 | ECU Is Faulted | CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a new Driver Door Module (DDM). REFER to Removal and Installation . TEST the system for normal operation. |
| B2477 | Module Configuration Failure | REFER to DTC TABLE . |
| U0140 | Lost Communication With Body Control Module (GEM ) | Go To PINPOINT TEST D . |
| U2050 | No Application Present | REFER to MODULE CONFIGURATION . |
| All other DTCs | - | REFER to DIAGNOSTIC TROUBLE CODE (DTC) TABLE . |