Telematics Module

Telematics Module









Removal

1. Turn the ignition to OFF.

2. Remove the instrument panel upper bin.

1. Remove the rubber mat.

2. Remove the 2 screws.

3. Remove the instrument panel upper bin.

3. Disconnect the telematics module electrical connector.

4. Remove the 2 screws and the telematics module.

5. To install, reverse the removal procedure.

Installation

1. Position the telematics module and install the 2 screws.
- Connect the electrical connector.

2. Install the instrument panel upper bin.

1. Position the instrument panel upper bin.

2. Install the 2 screws.

3. Install the rubber mat.

3. Initialize the telematics module.

1. Wait 5 minutes after the modem-antenna is installed.

2. Turn the ignition to RUN.

3. Wait 10 seconds.

4. Start the vehicle and run the engine for 30 seconds.

5. Turn the ignition to OFF.