October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Timing Cover

Tighten the 20 engine front cover fasteners in the sequence shown in 2 stages.
Stage 1: Tighten all fasteners to 10 Nm (89 lb-in).
Stage 2: Tighten all fasteners to 20 Nm (177 lb-in).
Stage 3: Tighten all fasteners an additional 45 degrees.

Loosely install the 4 bolts, then tighten in 2 stages, in the sequence shown.
Stage 1: Tighten to 10 Nm (89 lb-in).
Stage 2: Tighten an additional 45 degrees.