LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> F 150 4WD V6-3.7L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Battery Current Sensor >> Service and Repair >> Generator Current Sensor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Generator Current Sensor




Battery Tray

1. Remove the battery. For additional information, refer to Battery and Battery Tray - Exploded View Battery and Battery Tray - Exploded View.

2. Disconnect the wire harness retainers from the battery tray and position the wire harness aside.

3. Remove the 3 bolts from the battery tray and carefully position the battery tray aside to gain access to the washer reservoir electrical connector.
- To install, tighten to 17 Nm (150 lb-in).

4. Disconnect the wire connector and washer hose from the washer bottle and remove the battery tray assembly.

5. To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals