Component testing procedure
WARNING: This page is about a different car, the 2012 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt | 1 and 3 | Tilt Up | Closed circuit |
| 1 and 2 | Down | Open circuit | |
| 1 and 4 | Open | Open circuit | |
| 1 and 5 | Close | Open circuit | |
| Down | 1 and 3 | Tilt Up | Open circuit |
| 1 and 2 | Down | Closed circuit | |
| 1 and 4 | Open | Open circuit | |
| 1 and 5 | Close | Open circuit | |
| Open | 1 and 3 | Tilt Up | Open circuit |
| 1 and 2 | Down | Open circuit | |
| 1 and 4 | Open | Closed circuit | |
| 1 and 5 | Close | Open circuit | |
| Close | 1 and 3 | tilt Up | Open circuit |
| 1 and 2 | Down | Open circuit | |
| 1 and 4 | Open | Open circuit | |
| 1 and 5 | Close | Closed circuit |