Refrigerator Module

Remove the rear floor console refrigerator. For additional information, refer to REFRIGERATOR in this information.

NOTE: Do not bend the condenser tubes. The screw driver must fit between the condenser tubes or damage may occur to the refrigerator.

Fig 1: Locating Refrigerator Module Mounting Bracket Screw

Courtesy of FORD MOTOR CO.

Using a long thin screw driver, remove the philips screw from the refrigerator module mounting bracket.
Disconnect the upper electrical connector from the refrigerator module.

Fig 2: Disconnecting Upper Electrical Connector From Refrigerator Module
Courtesy of FORD MOTOR CO.
Rotate the refrigerator module to the right and remove from the mounting bracket.

Fig 3: Rotating Refrigerator Module
Courtesy of FORD MOTOR CO.
Disconnect the lower electrical connector from the refrigerator module.

Fig 4: Disconnecting Lower Electrical Connector From Refrigerator Module
Courtesy of FORD MOTOR CO.
Disconnect the refrigerator module-to-refrigerator electrical connector.

Fig 5: Disconnecting Refrigerator Module-To-Refrigerator Electrical Connector
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.