Section 1910 (Starting System): Specifications
WARNING: This page is about a different car, the 2012 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Normal engine cranking speed | 200-250 RPM |
| Starting circuit maximum voltage drop (Engine at normal operating temperature) | 0.5 volt |
| Starter motor maximum load current draw | 800 amps |
| Starter motor no-load current draw | 60-80 amps |
| Starter motor normal load current draw | 130-190 amps |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Starter motor bolt | 27 | 20 | - |
| Starter motor solenoid battery cable nut | 12 | - | 106 |
| Starter motor solenoid wire nut | 5 | - | 44 |
| Starter motor stud bolt | 27 | 20 | - |
| Transmission manual control lever nut | 18 | - | 159 |