LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Flex SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 1915 (Engine Controls - Electronic Engine Controls) >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Removal

WARNING: This page is about a different car, the 2012 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: PCM installation DOES NOT require new keys or programming of keys.
  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to MODULE CONFIGURATION .
  2. Remove the cowl panel grille. For additional information, refer to FRONT END BODY PANELS .
  3. Disconnect the 3 PCM electrical connectors.
  4. Remove the 2 nuts and the PCM.
scientia non olet · About LEMON Manuals