DTC U0428: Invalid Data Received from the Steering Angle Sensor Module: Description

The PSCM will monitor the HS-CAN bus when the ignition has been on for more than 5 seconds, when the voltage to the PSCM is greater than 9 volts and when there are no DTCs present that are inhibiting PSCM operation.

• DTC U0428:00 (Invalid Data Received from Steering Angle Sensor Module: No Sub Type Information) - This DTC will set if the PSCM receives an invalid or unknown message from the steering angle sensor module instead of the actual steering angle data message, and DTC U0001:00 is not present in the PSCM.