LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Flex Titanium, 3.5 T >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle/Transmission - 6F50-6F55 - General Procedures, In-Vehicle Repair, Removal, Disassembly And Assembly Of Subassemblies, Assembly, Installation >> Disassembly And Assembly Of Subassemblies >> Low One-Way Clutch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Low One-Way Clutch

    NOTE: Do not clean in water or with water-based solvents. Damage to the component may occur.
    NOTE: The low One-Way Clutch (OWC) cannot be disassembled.
    Fig 1: Identifying Low One-Way Clutch (OWC)
    G07467929Courtesy of FORD MOTOR CO.
  1. Clean and inspect the low OWC  for cracks and damaged splines. The internal splined section should rotate counterclockwise and lock when rotated clockwise. If any damage is found or the clutch does not rotate or lock, install a new low OWC  .
  2. Inspect the forward clutch surface for damage. If the surface is burned or worn excessively, install a new OWC  .
    Fig 2: Identifying Forward Clutch
    G07467930Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals