Component testing procedure
WARNING: This page is about a different car, the 2012 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Headlamp on circuit | 3 and 7 | Off | Open circuit |
| Park | Open circuit | ||
| Low | Closed circuit | ||
| Auto | Open circuit | ||
| Headlamp off circuit | 3 and 6 | Off | Closed circuit |
| Park | Open circuit | ||
| Low | Open circuit | ||
| Auto | Open circuit | ||
| Autolamp circuit | 3 and 4 | Off | Open circuit |
| Park | Open circuit | ||
| Low | Open circuit | ||
| Auto | Closed circuit | ||
| Parking lamps | 2 and 3 | Off | Open circuit |
| Park | Closed circuit | ||
| Low | Open circuit | ||
| Auto | Open circuit | ||
| Fog lamps | 3 and 5 | Off | Open circuit |
| Fog lamps | Closed circuit |