Check MyKey™ System Status
- The vehicle system check provides the status of the following MyKey™ parameters:
- MYKEY DISTANCE - This odometer only tracks mileage when a MyKey™ is used. If mileage does not accumulate, the intended MyKey™ is not being used or the IC is at fault. The only way to reset this odometer to zero is by disabling the MyKey™. If this odometer is lower than the last time it was checked, the MyKey™ system has been cleared. If desired, it may be necessary to program the MyKey™ restricted features into the key.
- # MYKEY(S) PROGRAMMED - Indicates how many MyKeys™ are programmed to the vehicle. It can also be used to determine if a MyKey™ has been disabled.
- # ADMIN KEYS PROGRAMMED - Indicates how many admin keys are programmed to the vehicle. It can also be used to determine if an additional spare key has been programmed to the vehicle.