Component testing procedure
WARNING: This page is about a different car, the 2011 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
ROOF OPENING PANEL CONTROL SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt | 6 and 2 | Tilt | Closed circuit |
| Slide | 3 and 2 | Close | Closed circuit |
| 4 and 2 | Open | Closed circuit | |
| 4 and 2 | Auto open | Closed circuit |