LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Fusion S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1535 (Information System And Entertainment System) >> Removal And Installation >> Audio Digital Signal Processing (DSP) Module >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2011 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Module configuration is required when a new audio Digital Signal Processing (DSP) module is being installed.
  1. Upload the audio DSP module configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION SYSTEM article.
  2. Remove the RH quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
  3. Disconnect the audio Digital Signal Processing (DSP) module electrical connectors.
  4. Remove the 3 screws and the audio DSP module.
    • To install, tighten to 7 Nm (62 lb-in).
  5. To install, reverse the removal procedure.
    • Download the configuration information from the scan tool. For additional information, refer to PMI in MODULE CONFIGURATION SYSTEM article.
scientia non olet · About LEMON Manuals