LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Fusion SE, 2.5 A, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Powertrain DTC Charts & Descriptions - DTC P0600 Through DTC P164A - (Except Diesel & Hybrid) >> DTC P062F: Internal Control Module EEPROM Error (Pcm)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P062F: Internal Control Module EEPROM Error (Pcm)

P062F (PCM) - INTERNAL CONTROL MODULE EEPROM ERROR

Description:  The powertrain control module (PCM) read only memory (ROM) has been corrupted.
Possible Causes: 
  • Aftermarket performance products
  • An attempt was made to change the calibration
  • PCM programming error
  • PCM internal software error
  • Damaged PCM
Diagnostic Aids:  Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , PROGRAMMING THE VID BLOCK FOR A REPLACEMENT PCM .
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC in table.
scientia non olet · About LEMON Manuals