Post Crash Alert
The post crash alert function is controlled by the SJB . If the Restraints Control Module (RCM) determines an impact of severity enough to deploy air bags has occurred (the air bags may or may not be deployed by the RCM ), the RCM will send a message to the Instrument Panel Cluster (IPC) over the High Speed Controller Area Network (HS-CAN) that an air bag deployable impact has occurred.
The IPC sends the message to the SJB over the Medium Speed Controller Area Network (MS-CAN). The SJB activates the post crash alert function by repeatedly cycling the horn on 3 times, then off for 4 seconds, until the battery dies or the function is turned off. The hazard lights will also flash with the horn sounding, but will keep flashing during the horn off cycle.
The post crash alert function can be turned off by:
- pressing the hazard switch (which may need to be pressed more than once).
- pressing the RKE transmitter UNLOCK button.
- pressing the RKE transmitter PANIC button.
The post crash alert feature acts similar to the perimeter alarm, but the horn cycle rate is different. The perimeter alarm function cycles the horn on and off, in regular intervals until 2 minutes and 45 seconds have elapsed, the battery dies or the function is turned off. Turning the ignition to the ON position will not deactivate the post crash alert, but will deactivate an activated perimeter alarm.
The post crash alert function cannot be configured off.
For the perimeter anti-theft, refer to ANTI-THEFT - PERIMETER .
For the battery saver, heated rear window, and power windows, refer to GLASS, FRAMES AND MECHANISMS .
For the convertible top, refer to CONVERTIBLE TOP .
For the exterior lighting, refer to EXTERIOR LIGHTING .
For the interior lamps and illuminated entry, refer to INTERIOR LIGHTING .
For the power door locks, and the RKE system, refer to HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS .
For the TPMS , refer to WHEELS & TIRES .
For the warning chimes, refer to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES .