LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1326 (MULTIFUNCTION Electronic Modules) >> Removal And Installation >> Body Control Module B (BCM-B) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module B (BCM-B): Removal

WARNING: This page is about a different car, the 2010 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Prior to the removal of the module, it is necessary to upload the module configuration information to a scan tool. This information must be downloaded into the new Body Control Module B (BCM-B) after installation. For additional information, refer to MODULE CONFIGURATION .
    NOTE: If the BCM-B  is being replaced, follow this step. If the BCM-B  is not being replaced, go to Step 2.
  1. Upload the module configuration information from the BCM-B  into the scan tool. For additional information, refer to MODULE CONFIGURATION .
  2. From the right side of the luggage compartment, remove the pushpin and position aside the RH luggage compartment trim cover.
  3. Remove the 4 BCM-B  bracket assembly nuts and position the assembly for access to the BCM-B  .
  4. Disconnect the 2 BCM-B  electrical connectors.
  5. Remove the 2 nuts and the BCM-B  .
scientia non olet · About LEMON Manuals