Removal and Installation
WARNING: This page is about a different car, the 2010 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It is not necessary to remove the Audio Control Module (ACM) to retrieve the part number. For additional information, refer to AUDIO CONTROL MODULE (ACM) SELF-DIAGNOSTIC MODE .
- Upload the ACM configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION to carry out Programmable Module Installation (PMI).
- Remove the center instrument panel finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
- Remove the 4 screws and the ACM
.
- Disconnect the electrical connectors.
- To install, reverse the removal procedure.
- Download the configuration information to the ACM . For additional information, refer to MODULE CONFIGURATION to carry out FMI .
NOTE:
Module configuration is required when a new ACM
is being installed.