Removal and Installation
WARNING: This page is about a different car, the 2010 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Vehicles with 5.4L 4V engine
- Remove the battery tray. For additional information, refer to
BATTERY, MOUNTING AND CABLES
.
All vehicles
- Disconnect the EGR system module tube-to-EGR system module fitting.
- To install, tighten to 40 Nm (30 lb-ft).
- Disconnect the EGR system module tube-to-exhaust manifold fitting and remove the tube.
- To install, tighten to 40 Nm (30 lb-ft).
- To install, reverse the removal procedure.