DTC P06B6: Internal Control Module Knock Sensor Processor 1 Performance
P06B6 - INTERNAL CONTROL MODULE KNOCK SENSOR PROCESSOR 1 PERFORMANCE
| Description: | The powertrain control module (PCM) has detected an error condition with the knock sensor (KS) processor integrated circuit. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Check for aftermarket performance products before installing a new powertrain control module (PCM). If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC in table. | ||