Accessory Protocol Interface Module (APIM)
ACCESSORY PROTOCOL INTERFACE MODULE (APIM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1201:1C | Steering Wheel Audio Switch Pack 2: Circuit Voltage Out of Range | Go to PINPOINT TEST L . |
| B1201:63 | Steering Wheel Audio Switch Pack 2: Circuit/Component Protection Time-Out | Go to PINPOINT TEST L . |
| B1252:04 | USB Port: System Internal Failure | Go to PINPOINT TEST M . |
| B1252:11 | USB Port: Circuit Short to Ground | Go to PINPOINT TEST M . |
| B1D79:01 | Microphone Input: General Electrical Failure | Go to PINPOINT TEST N . |
| U0100:00 | Lost Communication With ECM/PCM: No Sub Type Information | Go to PINPOINT TEST W . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | Go to PINPOINT TEST X . |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | Go to PINPOINT TEST Y . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | Go to PINPOINT TEST Z . |
| U016A:00 | Lost Communication With Global Positioning System Module: No Sub Type Information | Go to PINPOINT TEST AA . |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | Go to PINPOINT TEST AB . |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the Accessory Protocol Interface Module (APIM) or Smart Junction Box (SJB). |
| U0423:00 | Invalid Data Received From Instrument Panel Control Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the APIM or Instrument Panel Cluster (IPC). |
| U046B:00 | Invalid Data Received From Global Positioning System Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the APIM or Global Positioning System Module (GPSM). |
| U0485:00 | Invalid Data Received From Radio: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the APIM or Audio Control Module (ACM). |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | PROGRAM the APIM . Refer to PMI in MODULE CONFIGURATION . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | PROGRAM the APIM . Refer to PMI in MODULE CONFIGURATION . |
| U3000:04 | Control Module: System Internal Failure | Go to PINPOINT TEST T . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new APIM . Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) in this information. REPEAT the self-test. |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:42 is still present, INSTALL a new APIM . Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) in this information. REPEAT the self-test. |
| U3000:88 | Control Module: Bus Off | Refer to MODULE COMMUNICATIONS NETWORK to diagnose the observed symptom. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | Go to PINPOINT TEST AG . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | Go to PINPOINT TEST AH . |