Starting System: Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Normal engine cranking speed | 140-220 rpm |
| Starter motor no load current draw | 60-80 amps |
| Starter motor normal load current draw | - |
| Starter motor maximum load current draw | 800 amps |
| Starter motor minimum stall torque (at 5 volts) | 14.7 Nm (130 lb-in) |
| Starting circuit maximum voltage drop (engine at normal operating temperature) | - |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Starter motor bolts and stud bolts | 27 | 20 | - |
| Starter motor ground cable nut | 22 | 16 | - |
| Starter motor solenoid B-terminal nut (2.3L engine) | 12 | - | 106 |
| Starter motor solenoid B-terminal nut (4.0L engine) | 12 | - | 106 |
| Starter motor S-terminal nut (2.3L engine) | 5 | - | 44 |
| Starter motor S-terminal nut (4.0L engine) | 6 | - | 53 |