Component testing procedure
MASTER WINDOW ADJUST SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Driver window circuit | 5 and 4, 2 and 1 | Up | Closed circuit |
| 5 and 1, 2 and 4 | Down | Closed circuit | |
| 2 and 4, 2 and 1 | Rest | Closed circuit | |
| Passenger window circuit | 5 and 3, 2 and 6 | Up | Closed circuit |
| 5 and 6, 2 and 3 | Down | Closed circuit | |
| 2 and 6, 2 and 3 | Rest | Closed circuit |