Component testing procedure
MULTIFUNCTION SWITCH, TURN PORTION - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | C202b-2 and C202a-10 | Left turn | Closed circuit |
| C202b-2 and C202a-9 | Left turn | Closed circuit | |
| C202b-2 and C202a-7 | Right turn | Closed circuit | |
| C202b-2 and C202a-8 | Right turn | Closed circuit | |
| Hazard | C202b-3 and C202a-10 | Turn signal switch in neutral, Hazard On | Closed circuit |
| C202b-3 and C202a-7 | |||
| C202b-3 and C202a-9 | |||
| C202b-3 and C202a-8 | |||
| C202b-1 and C202a-10 | Turn signal switch in neutral, Hazard Off | Closed circuit | |
| C202b-1 and C202a-8 |