LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Ranger 2D Pickup, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Cruise Control System - Speed Control) >> Removal And Installation >> Speed Control Switch >> Removal and Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal and Installation

WARNING: This page is about a different car, the 2009 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. Using a suitable pry tool such as a flat-bladed screwdriver, remove the speed control switch by prying the switch toward the rear of the vehicle.
    • Disconnect the electrical connector.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals