LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Transit Connect Van Passenger >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Module >> Removal And Installation >> Generic Electronic Module (GEM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Generic Electronic Module (GEM): Installation

  1. Connect the electrical connectors.
    2. NOTE: If the GEM  is not being replaced, this is the last step that is necessary.
  2. Position the GEM  and install the 2 screws.
    3. NOTE: When successful, this step provides the calibration necessary for the GEM  operation and clears DTC B2477. The clearing of this DTC indicates the calibration data has been successfully downloaded to the GEM  .
  3. Download the GEM  configuration information from the scan tool to the GEM  . For additional information, refer to MODULE COMMUNICATIONS NETWORK - MODULE CONFIGURATION article.
  4. Carry out the GEM  self-test (must include an on-demand self-test) and then repeat the self-test to confirm all DTCs have been cleared.
scientia non olet · About LEMON Manuals