Component testing procedure
WARNING: This page is about a different variant/trim than selected.
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move key to these positions | A good switch will indicate |
|---|---|---|---|
| Run/Accessory power circuit | 7 and 3 | Accessory | Closed circuit |
| Lock/Off/Run/Start | Open circuit | ||
| 9 and 3 | Accessory/Lock/Off | Open circuit | |
| Run | Closed circuit | ||
| Start | Open circuit | ||
| Run power circuit | 2 and 8 12 and 13 | Accessory/Lock/Off | Open circuit |
| Run | Closed circuit | ||
| Start | Open circuit | ||
| Run/Start power circuit | 7 and 1 | Accessory/Lock/Off | Open circuit |
| Run/Start | Closed circuit | ||
| Start power circuit | 2 and 5 | Accessory/Lock/Off/Run | Open circuit |
| Start | Closed circuit |