Section 25 (Charging System): Specifications
WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Generator (Super Heavy-Duty Option) | |
| Pulley ratio | 3.00:1 |
| Rating | 135 amps @ 600 RPM (min) to 225 amp @ 2, 000 RPM (max) |
| Voltage regulator type | Electronic integral with generator |
| Generator | |
| Pulley ratio | 2.72:1 |
| Rating | 70 amp @ 675 RPM (min) to 120 amps @ 2, 000 RPM (max) |
| Voltage regulator type | Electronic integral with generator |
| Generator (Extra Heavy-Duty Option) | |
| Pulley ratio | 2.72:1 |
| Rating | 90 amp @ 675 RPM (min) to 155 amps @ 2, 000 RPM (max) |
| Voltage regulator type | Electronic integral with generator |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Brush and terminal holder screws | 4 | - | 35 |
| Generator B+ terminal nut | 17 | - | 150 |
| Generator bolts | 25 | 18 | - |
| Generator bracket bolts | 10 | - | 89 |