Section 27 (Steering System): Specifications
WARNING: This page is about a different variant/trim than selected.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity | ||
|---|---|---|---|---|
| Dye-Lite® ATF/Power Steering Fluid Leak Detection Dye 164-R3701 (Rotunda) |
- | - | ||
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) |
MERCON® V | 2.5L (5.4 pt)(1) | ||
|
||||
GENERAL SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Power Steering Gear | |||
| Meshload | 0.28-0.79 Nm (2.5-7 lb-in) | ||
| Meshload + preload (maximum) | 2.15 Nm (19 lb-in) | ||
| Power Steering Purge Vacuum | 68-85 kPa (20-25 in/hg) | ||
| Steering gear preload | 0.34-1.36 Nm (3-12 lb-in) | ||
| Turning effort | 31 Nm (23 lb-ft) | ||
| Turns lock-to-lock | 4 | ||
| Steering linkage vertical/lateral deflection(1) | - | ||
| Power Steering Pump | |||
| Flow | 10.6-12.0L/min(2.8-3.2 gpm)Fluid @ 74°-80°C (165°-176°F) Engine at idle | ||
| Minimum capacity | 5.3L/min(1.4 gpm)Fluid @ 74°-80°C (165°-176°F) Engine at idle Pressure at 5, 171 kPa (750 psi) | ||
| Pressure | 1, 034 kPa(150 psi)Fluid @ 74°-80°C (165°-176°F) Engine at idle | ||
| Relief pressure (diesel engines) | 9, 652-10, 550 kPa (1, 400-1, 530 psi) | ||
| Relief pressure (gas engines) 15, 200 and 18, 000 Gross Vehicle Weight Rating (GVWR) | 9, 000-9, 900 kPa(1, 300-1, 430 psi) | ||
|
|||
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| Drag link nut | 90 | 66 |
| Meshload adjusting screw locknut | 31 | 23 |