Section 30 (Front Disc Brake System): Specifications
WARNING: This page is about a different variant/trim than selected.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) |
WSS-M6C62-A or WSS-M6C65-A1 | 1550 - 1750 ml (3.27 - 3.69 pt) |
| High Temperature 4x4 Front Axle and Wheel Bearing Grease XG-11 |
WSS-M1C267-A1 | - |
| Metal Brake Parts Cleaner PM-4-A or PM-4-B (US); CPM-4 (Canada) |
- | - |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A |
ESE-M1C171-A | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Disc | |
| Minimum brake disc thickness | 38.4 mm (1.511 in) |
| Brake Pads | |
| Maximum brake pad taper wear (in any direction) | 3.0 mm (0.118 in) |
| Minimum brake pads thickness | 3.0 mm (0.118 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Brake caliper anchor plate bolts | 265 | 195 | - | ||
| Brake caliper flow bolt | 40 | 30 | - | ||
| Brake caliper guide pin bolts | 37 | 27 | - | ||
| Brake tube fitting | 17 | - | 150 | ||
| Front wheel hub extender nuts | 176 | 130 | - | ||
| Spindle nut (1) | - | - | - | ||
|
|||||