Section 46 (Power Steering System): Specifications
WARNING: This page is about a different variant/trim than selected.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity | ||
|---|---|---|---|---|
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) |
MERCON® V | 2.5L (5.4 pt)(1) |
||
| Multi-Purpose Grease XG-4 and/or XL-5 |
ESB-M1C93-B | - | ||
| Threadlock and Sealer TA-25 |
WSK-M2G351-A5 | - | ||
|
||||
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Meshload | 0.28-0.79 Nm (2.5-7 lb-in) |
| Meshload + preload (maximum) | 2.15 Nm (19 lb-in) |
| Steering gear preload | 0.34-1.36 Nm (3-12 lb-in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Drag link-to-sector shaft arm nut | 90 | 66 | - |
| Hydraulic booster jumper line bracket nuts | 9 | - | 80 |
| Hydraulic booster jumper line-to-booster fitting | 28 | 21 | - |
| Meshload adjusting screw lock nut | 31 | 23 | - |
| Power steering fluid cooler bolts | 11 | - | 97 |
| Power steering fluid reservoir bracket bolt | 9 | - | 80 |
| Power steering fluid reservoir-to-reservoir bracket bolt | 5 | - | 44 |
| Power steering pump bolts | 25 | 18 | - |
| Pressure line-to-hydraulic booster jumper line fitting | 63 | 46 | - |
| Pressure line clamp plate bolt | 25 | 18 | - |
| Pressure line-to-steering gear fitting | 20 | - | 177 |
| Return line-to-steering gear fitting | 20 | - | 177 |
| Sector shaft arm nut | 275 | 203 | - |
| Sector shaft housing cover bolts | 50 | 37 | - |
| Steering column shaft bolt (commercial chassis) | 55 | 41 | - |
| Steering column shaft bolt (non-commercial chassis) | 25 | 18 | - |
| Steering gear bolts | 165 | 122 | - |
| Steering gear mounting bolt | 25 | 18 | - |
| Valve housing bolts | 55 | 41 | - |
| Worm thrust bearing retainer ring | 99 | 73 | - |
| Worm thrust bearing retainer ring setscrew | 2 | - | 18 |