Section 58 (Starting System): Specifications
WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Normal engine cranking speed | 140-220 RPM |
| Starter motor maximum load | 800 amps |
| Starter motor minimum stall torque (at 5 volts) | 14.7 Nm (130 lb-in) |
| Starter motor no load current draw | 60-80 amps |
| Starter motor normal load current draw | 130-220 amps |
| Starting circuit maximum voltage drop (engine temperature normal) | 0.5 volt |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Starter motor bolts | 25 | 18 | - |
| Starter motor ground cable nut | 25 | 18 | - |
| Starter solenoid B-terminal nut | 12 | - | 106 |
| Starter solenoid S-terminal nut | 6 | - | 53 |