Cooling System Flushing
WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOLS CHART
| Drain Kit 164-R3662 or equivalent |
|
| Flush Kit Hardware Package 164-R3658 or equivalent |
|
| Proflush and Fill Coolant Flush and Fill 023-00154 or equivalent |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Motorcraft® Premium Cooling System Flush VC-1 |
ESR-M14P7-A |
- Once pressure is released, remove the pressure relief cap.
Drain the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
- Remove the thermostat. For additonal information, refer to THERMOSTAT .
- Install the coolant hose connection without the thermostat.
- Use cooling system Flush-All, Flush Kit Hardware Package and Drain Kit to flush the engine and radiator.
Use Premium Cooling System Flush VC-1 or equivalent meeting Ford specification ESR-M14P7-A.
- Install the thermostat. For additonal information, refer to THERMOSTAT .
- Fill and bleed the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
WARNING:
Always allow the engine to cool before opening the cooling system. Do not unscrew the coolant pressure relief cap when the engine is operating or the cooling system is hot. The cooling system is under pressure; steam and hot liquid can come out forcefully when the cap is loosened slightly. Failure to follow these instructions may result in serious personal injury.
NOTE:
Refer to the cooling system Flush-All Operating Instructions for specific vehicle hook-up.