Component testing procedure
WARNING: This page is about a different variant/trim than selected.
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Power and Ground Checks Before Any Other Tests | 7 and 1 7 and 3 7 and 5 7 and 8 |
All window switches - at rest | Open circuit |
| 2 and 1 2 and 3 2 and 5 2 and 8 |
All window switches - at rest | Closed circuit | |
| Left front window circuit | 7 and 5 | Up | Closed circuit |
| 7 and 1 | Down | Open circuit | |
| Right front window circuit | 7 and 8 | Up | Closed circuit |
| 7 and 3 | Down | Closed circuit |