Component testing procedure
WARNING: This page is about a different variant/trim than selected.
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Up Switch Circuit | 5 and 3 | Up | Closed circuit |
| 1 and 2 | Up | Closed circuit | |
| Rest | Closed circuit | ||
| Down Switch Circuit | 2 and 3 | Down | Closed circuit |
| 5 and 3 | Down | Closed circuit | |
| Rest | Closed circuit |