Transmission Speed Sensor: Service and Repair

Turbine Shaft Speed (TSS) Sensor

Removal

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Disconnect the Turbine Shaft Speed (TSS) sensor electrical connector.





3. Remove the bolt and remove the TSS (Turbine Shaft Speed) sensor.
- Tighten to 10 Nm (89 lb-in).






Installation

1. Install the TSS (Turbine Shaft Speed) sensor and the TSS (Turbine Shaft Speed) sensor bolt.
- Tighten to 10 Nm (89 lb-in).






2. Connect the TSS (Turbine Shaft Speed) sensor electrical connector.